Cost: less than $5
Project time: 30 minutes
Difficulty: You have to cut off a piece of 2x4 wood and drill holes in it.
- Saw to cut wood (I used a normal hand saw)
- Screwdriver (you can use your drill)
- One 2x4 stud (8 ft. long)
- Some 2 1/2 inch deck screws (I like the T-25 star head)
- Wood Glue (optional)
This is yet another project I built from scrap wood. You need only a single 2x4 stud (8ft. long). and some wood screws. If you don't have a dip belt, check out the Project Index for that project.